The following components are inspected. Their condition is recorded and compared to manufacturer's specs. Recommendations are made per the Motorist Assurance Program Uniform Inspection Guidelines:

Belts Visual Inspection
Checked for glazing, cracking, peeling and softening
Checked for proper tensioning
Checked for proper alignment of drive pulleys
Condition of each belt is recorded

Hoses Visual Inspection
Checked for leaks
Checked for hardening, cracking and softening
Pressure test cooling system for leaks
Condition of each hose is recorded

Exposure to heat, vibration and contamination makes belts and hoses wear out faster than any other components in your car. That's why regular inspections are so important. Here are the belt and hose types in your car, along with their applications.

Accessory Drive Belts
While some accessories in your car are electrically powered by the charging system, others use the engine itself as their power source. The power for these accessories is delivered by a system of pulleys and belts. Examples of these accessories are

• Alternator
• Water Pump for engine cooling
• Power Steering Pump
• Air Conditioning Compressor
• Radiator Cooling Fan
• Many late model cars use a single serpentine belt in place of individual belts to drive these accessories.

Hoses
The hoses that convey your car's fluids are made of two rubber layers with a layer of fabric in between. Typical hoses include:

• Radiator and Heater Hoses-These hoses convey coolant to the engine and heater core.
• Fuel Hose- As the name implies, this hose transports gasoline from the tank to the engine.
• Power Steering Hose-It connects the power steering pump to the steering gear.